Road Marking Paint

AQUASTRIPE WBR is a Single pack, High solid, fast drying, durable, Water borne Acrylic Paint for application by cold paint spray machine, brush or roller. AQUASTRIPE WBR offers all the benefits of a water reducible paint, and quickly dries to a no track condition in less than ten minutes making it an ideal traffic marking for roadways and airports. AQUASTRIPE WBR provides excellent retro-reflectivity when matched with the proper bead gradation and adhesion coating. AQUASTRIPE WBR uses the latest, 3rd generation acrylic emulsions and is the most durable, high reflective performance, waterborne system available today. AQUASTRIPE WBR is environment friendly and requires no organic solvents.

Advantages of AQUASTRIPE WBR:

• AQUASTRIPE WBR has best results on asphalt and concrete and roads made with concrete pacer blocks.

• Quick drying with minimal no track time.

• It is Non flammable.

• Water reducible.

• Has excellent glass bead retention.

• Excellent recoating properties and wear resistance.

• It is free from lead, chrome and other toxic ingredients.

• Easy to apply.

The Concrete Primer ensures excellent adhesion of the thermoplastic strips onto concrete or old bitumen, thereby increasing the life of road marking. Being quick drying and easy to apply, no significant time under-runs are expected to owe to primer application.

Method of Use:

• Clean the road surface thoroughly removing all dust, oil, grease, paint and thermoplastic material.  
• Ensure the road surface is completely dry and free from moisture.
• Cold and humid conditions require longer drying time. Such conditions should be avoided.

Method of Application:

• Once the substrate has been inspected, it normally needs to be pre-treated. The necessary quantity of hardener must be adjusted in light of the temp. of the surface.
• You must not dose less than the given quantity of hardening powder.
• Permark 2K primer must be applied evenly without leaving piddles by means of paint roller or brush. If rubber blades are used, the surface must always be rolled with paint roller afterward. Mixing Ratio.
• If settling is observed in the drum, loosen the settled material with the help of hand stirrer followed by a power-driven stirrer for quick homogenous mixing. 

High-performance road marking cold plastic material designed for superior day and dry night visibility. These cold plastic materials are weather and high abrasion resistant. Permark 2K Cold Plastic Road Marking Material is a formulation of plasticized resin, aggregate, pigment and glass beads supplied in liquid form, directly applied to the road surface where it sets very quickly. These cold plastic Road Marking Material is weather & high abrasion resistant and have a much longer life and are recommended for high traffic areas to perform excellently in areas like pedestrian crossings which are more prone to wearing out and can be applied on newly laid BC surface or concrete surface.

Permark 2K Cold Plastic Road Marking Material is manufactured under strict quality control parameters specified by Automark's qualified team of production and laboratory Professionals, by the aid of modern computerized equipment. The Paint consists of 100% Liquid and is environment-friendly as it is solvent free.

Cold Plastic Road markings are generally more superior and cost-effective than paint markings due to better durability, reflectivity, and visibility.

This is quick drying, solvent-based paint. Based on the solvent based acrylic resin. Can be used for marking roads and curbs. Easy to apply. It has UV resistant colors. Ideal for use on asphalt and concrete roads, primarily for kerbstones, speed humps or other areas with light traffic.

Advantages:

• Very tough and abrasion resistant.
• Excellent weather durability.
• Resistant to petrol, diesel, engine oil, water etc.
• Fast drying

Aqua stripe Is Is Single Pack, High Solid, Fast Drying Durable,Water-Borne Acrylic Road Marking Paint For Application By ColdPaint Spray Machine, Brush Or Roller. Aqua stripe Is Conforms To The Is 164-1981 Specification. It Is A Suitable Alternative For Highways And Airfield Use. Aqua stripe Is Offers All The Benefits Of A Water Reducible Paint And Quickly Dries To A No Track Condition In Less Than Ten Minutes Making It An Ideal Traffic Marking For Roadways And Airports. Aqua stripe Is Provides Excellent Retro-Reflectivity When Matched With The Proper Bead Gradation And Adhesion Coating. Aqua stripe Is Uses The Latest, 3Rd Generation Acrylic Emulsions And Is The Most Durable, High Reflective Performance, Waterborne System Available Today.

A high quality, alkyd modified chlorinated rubber paint that is specially designed for road marking. As a road marking paint to draw parking bay lines, arrows, numbers, lines etc. Suitable for use on bituminous and concrete surfaces.

Advantages:

• Very tough and abrasion resistant.
• Excellent weather durability.
• Resistant to petrol, diesel, engine oil, water etc.
• Fast drying

Other Details:

• We provide different grades of thermoplastic materials depending on whether the application is to be by spray, screed or extrusion.
• Automark Technologies (India) Pvt. Ltd. is also able to provide specialized thermoplastic materials for producing structured road markings and raised profile marking/rib marking.
• We manufacture our thermoplastic materials to meet the various climatic conditions encountered around the world.
• In Automark Technologies (India) Pvt. Ltd. thermoplastic materials are available in white and yellow colours. We can manufacture other colours on request.
• Technical Data Sheets and MSDS available on request.

In order to keep pace with the never-ending demands of customers, we are involved in offering a wide range of Cold Plastic White Road Marking Paint.

We have highly acknowledged organization engaged in presenting a remarkable range of Aquastrip Yellow Road Marking Paint.

As per the needs and requirements of our clients, we are involved in providing Road Marking Material.

Surface Preparation:

The surface should be free of moisture, grease, free from dust and loose dirt, or particulate matter or other substances which may hinder the mechanical bond to the surface. On the concrete surface, a suitable tack coat primer should be used in accordance with the manufacturer’s instructions prior to application. It should be noted that preformed thermoplastic pavement markings laid on new bituminous surfaces by the use of the normal heat of a propane torch.